|
|
GCD International offers drum heaters designed to meet your particular requirements.
The ovens have capacities of 8 to 32 drums and this can be extended to meet your needs.
We custom design to special requirements with indoor and outdoor models available. Loading and unloading is achieved by placing 4/205 litre drums onto a conventional pallet and fork lift loading the pallet into the interior support frame. The support frame incorporates a rear stop for reliable pallet placement.
The insulated panel construction has excellent heat retention properties and keeps the overall weight of the units to a minimum.
A spill tray is manufactured from stainless steel and is utilised to contain
any spills and allows simple reclamation.
Heating may be achieved by:
depending on the application and services available.
The heaters shown are used in the paint industry which is classified as Class 1, Zone 1 hazardous area. GCD drum heaters may be skid mounted ensuring minimum installation time and allowing for future relocation. All that is required is a level concrete mounting surface (existing factory floors are generally acceptable)
Following placement, the connection of services is all that is required to start operation. Workshop pre testing is done as standard.
Alternatively, models are available with floors flush with shop floor to permit loading via hand pallet trucks. If required, GCD can fully permit loading via hand pallet trucks. If required, GCD can fully install and commission on your site. Optional exhaust fans are available to prevent build up of volatiles.
Controls are simple to operate and include indicating temperature controller, oven temperature shut off and start and stop buttons.
Temperature control/accuracy of ± 2.5oC.
Optional controls include:
 |
© 2002 GCD International Pty Ltd. |
